When you perform a survey, the intention is to get a representative image about a number of variables or statements within a certain target group or population. Due to practical reasons (too large, too expensive, too time-consuming,…) it is often difficult to interrogate the total population. In that case a sample is used. This is a selection of respondents chosen in such a way that they represent the total population as well as possible.
It is very important to use a correct sample size. When your sample is too big, this will lead to unnecessary waste of money and time. On the other hand, when it’s too small, your results will not be statistically significant and you will not come to reliable conclusions.
There are many different sampling methods. One of the most used is the random sample, where all members of the population have equal chances of being selected for the sample. On the support page of our site is a very useful and easy tool to calculate the minimal sample size needed for a survey conducted on a random sample. The calculation is based on the following parameters :
- Size of the population
Here you have to enter the size of the group that has to be represented by the sample. If you conduct an employee survey for instance, your population would be the total staff. Once the population exceeds 20,000, your sample size will not change very much anymore. - Preferred margin of error
This is the positive or negative deviation you allow on your survey results for the sample, in other words the required precision level. Suppose in your survey 40% of the respondents pick a certain answer and your margin of error is 2%. This would mean that if you interrogate the total population, you can be sure that between 38% and 42% would pick the same answer. The smaller the allowed margin of error, the larger your sample will have to be. - Desired confidence level
The confidence level tells you how sure you can be of the margin of error, in other words how often the actual percentage of the population that picks a certain answer, lies within the margin of error. In market research, margins of error are calculated generally for a confidence level of 95%. This means the survey results will be in line with reality 19 out of 20 times. If you want a higher confidence level (e.g. 99%) your sample will have to be larger.
Once you have calculated the sample size, you know how many respondents you need to generate. Then you must still estimate how many individuals out of the population to ask to participate to insure the required number of respondents. For instance, if you send out email invitations and your sample size is 100, and the expected response rate is 20%, then you will have to send out 500 invitations.
After the data-collection phase of your survey you will know the actual number of respondents that have participated. Unless it happens to be the exact sample size you were looking for, you will then need to calculate the achieved margin of error.
Please note, the confidence level and margin of error calculated by our tool is for a random sample. Furthermore, it assumes the response pattern you receive is normally distributed. For sample sizes above 30, the normal distribution usually will be a good estimation of the actual way the responses are distributed (see also the central limit theorem). For smaller sample sizes the Student’s t-distribution is more appropriate, but is not supported by our sample size calculator.
118 comments
Join the conversationNadiah - May, 2019
Hi, I in progress to collect data. My population 142, sample size 104, but then i only managed to get 55 people only. how to determine the percentage of representative? or it related to margin of error? I’m quite confused. thanks
Gert Van Dessel - May, 2019
Hi Nadiah,
It is the efective number of respondents that determines your sample size. This means yourv sample size is 55, not 104.
A sample of 55 for a population of 142 corresponbds with a margin of error of 10,4% for a 95% confidence level.
You can check this with our sample size calculator.
Satya Pattanaik - April, 2019
Hello
I need your help!
I am conducting a sample based household survey to estimate child labour. After 3 years of intervention, a sample based household survey will be conducted to see if there is any reduction in child labour. The former survey is baseline and the latter is endline. So can you suggest which formula should be used to estimate the sample size for the baseline survey.
Gert Van Dessel - May, 2019
The formula to calculate sample sizes is:
SS = (Z-score)² * p*(1-p) / (margin of error)²
Z-score = 1,96 for confidence level 95%
Proportion p is your expected outcome. If you don’t have any idea about the proportion, you can take 0,5. This will maximize your sample.
After calculation of sample size you have to correct for the total (estimated) population
SSadjusted = (SS) / (1 + [(SS – 1) / population])
You can also check with our sample size calculator.
ALEK - March, 2019
hello, i want to conduct a a study with 150 people,
what will be my sample size?
and help ME TO DETERMINE IT
Gert Van Dessel - April, 2019
Alek,
You can use our sample size calculator to calculate this for different options.
aastha - February, 2019
Hi,
I am going to conduct a household survey. I would like to know the sample size of my survey with 95%confidence interval , 5% margin of error and 50% response rates.
Thank you
Gert Van Dessel - February, 2019
You can use our sample size calculator to calculate your sample for different populations, confidence levels and margins of error.
E.g. for a population of 10000, confidence level 95% and MoE 5% your sample size will be 370.
Maregere Editor - February, 2019
Hell i am also doing study what is the sample size of 300 households
Gert Van Dessel - February, 2019
You can use our sample size calculator to calculate your sample for different confidence levels and margins of error.
E.g. for confidence level 95% and MoE 5% your sample size will be 169.
Sparkles - January, 2019
Hi
I am doing a study on secondary school learners, trying to determine their environmental awareness levels, perceptions and participation. I want to conduct this research in 16 secondary schools but targeting only grade 9’s and 11’s, their numbers range from 240 to 350 in each of the schools and I want to determine a correct sample sample size per school, and per grade (9 and 11), please help
Gert Van Dessel - February, 2019
Hi Sparkles,
Based on your numbers the total population will be around 4800 pupils.
For a margin of error of 5% and confidence level 95% you will need 356 respondents in total (see also our sample size calculator, spread proportionally across the schools. This is when you want to draw conclusions for your population in general.
If you want to draw conclusions per school separately, your sample needs to be higher. For 300 pupils in one school, you will need 169 respondents to obtain a margin of error of 5% for a 95% confidence level for that particular school.
Jannat Ara - January, 2019
why don’t we consider population size in case of sample size determination like
n = Z^2 * p *q /e^2
Gert Van Dessel - January, 2019
Jannat,
This is the formula to calculate sample size. For finite known pouplations we use an adjustment factor:
SS adjusted = SS/[1 + (SS-1)/population)
Magnolia T. Grefalde - December, 2018
Hello. For my study, the population is 57. When I computed for sample size using your calculator, it was indicated that the required sample size is 50 with a margin of error of 4. something. Is it appropriate already? How exactly was 50 determined. Please help. I need the exact computation for my study. Thank you.
Gert Van Dessel - December, 2018
The formula to calculate sample sizes is:
SS = (Z-score)² * p*(1-p) / (margin of error)²
Z-score = 1,96 for confidence level 95%
Proportion p is your expected outcome. If you don’t have any idea about the proportion, you can take 0,5. This will maximize your sample.
After calculation of sample size you have to correct for the total (estimated) population
SSadjusted = (SS) / (1 + [(SS – 1) / population])
For a population of 57 and confidence level 95% with margin or error 5% your sample size will be 50 (if MoE = 4 then sample size will be 53).
You can check with our sample size calculator.
Rakib - December, 2018
I want to do a survey of 80 respondents randomly. Then what will be my sampling formula? Please help
Gert Van Dessel - December, 2018
The formula to calculate sample sizes is:
SS = (Z-score)² * p*(1-p) / (margin of error)²
Z-score = 1,96 for confidence level 95%
Proportion p is your expected outcome. If you don’t have any idea about the proportion, you can take 0,5. This will maximize your sample.
After calculation of sample size you have to correct for the total (estimated) population
SSadjusted = (SS) / (1 + [(SS – 1) / population])
If you have sample size 80 tyou can calculate backwards for a given population, confidence level and margin of error.
Or you can use our sample size calculator for immediate result.
Salma - December, 2018
Hello Van Dessal. Sorry for replying into someone’s comment. I sow the formula for unknown population. But my concern is that, the sample size needs to be distributed in four strata. Now, how can I divide it while the population is unknown?
Gert Van Dessel - January, 2019
Hi Salma,
You will need to make an estimation of your population and try to divide your sample in 4 representative subsamples.
You can always look for more detailed information on the subject in specialized statistical fora.
Mukuha - November, 2018
Hi, please assist me to compute sample size for a house hold survey where the number of house holds in the region are 26587 for my paper also consider giving me the formula to use
Gert Van Dessel - December, 2018
The formula to calculate sample sizes is:
SS = (Z-score)² * p*(1-p) / (margin of error)²
Z-score = 1,96 for confidence level 95%
Proportion p is your expected outcome. If you don’t have any idea about the proportion, you can take 0,5. This will maximize your sample.
After calculation of sample size you have to correct for the total (estimated) population
SSadjusted = (SS) / (1 + [(SS – 1) / population])
For a population of 26587 households and confidence level 95% with margin or error 5% your sample size will be 379.
You can check with our sample size calculator.
Johanne Morales - September, 2018
Hi, I’m trying to figure out the sample size for a population of 200 people. Using your sampse calculator with a MOE = 5% and CI = 95%, I got 132. However I need to know the exact computation and show the step-by-step for the sample size value and put it in the paper I’m doing. Do you mind giving it to me? Thanks!
Gert Van Dessel - September, 2018
The formula to calculate sample sizes is:
SS = (Z-score)² * p*(1-p) / (margin of error)²
Z-score = 1,96 for confidence level 95%
Proportion p is your expected outcome. If you don’t have any idea about the proportion, you can take 0,5. This will maximize your sample.
After calculation of sample size you have to correct for the total (estimated) population
SSadjusted = (SS) / (1 + [(SS – 1) / population])
Geoff - July, 2018
We are going to aggregate data that we already have from within our client base so we know that we will have 100% for each category we are surveying.. How big of a sample size within each category would be needed to get a proper benchmark? I was thinking 100 but wanted to get your opinion. Thank you!
Gert Van Dessel - July, 2018
Hi Geoff, sorry for thte late reply.
The margin of error for a sample size of 100 depends on the size of your total population.
Once your population gets larger than 1000, your margin of error will be around 10%.
You can check for different population sizes using our sample size calculator.
sol - June, 2018
Hi, we are about to conduct a survey. We have a total population of 1100 customers. and we want to know how satisfied they are with our service. How many customers should be invited to answer our survey? thanks so much.
Gert Van Dessel - July, 2018
Hi,
Sorry for the late reply.
You can use are sample size calculator to calculate your sample size for different confidence levels and margins of error.
Often a confidence level of 95% and MoE of 5% is used, which results in a sample size of 285 for your population.
Nianca - September, 2017
Hello, I am doing a survey research on 90 nos. of urban poor area where the approximate households – 27,966 and Approximate population – 167796. what should be the sample size of my representative population?
Maarten Marijnissen - September, 2017
Hi Nianca,
It depends on your general research question.
If you want to draw conclusions about households in the area, you should use the population size of 27,966 to survey different households and compare them.
The sample size will be 379 with a 95% confidence level and 5% margin of error. If you want to survey individuals and compare results based on socio-demographics (age, gender) you should use the general population to calculate your sample size.
You can calculate sample sizes using our online calculator.
Good luck with your research!
shubby rank - February, 2017
Am using a sample size of 160 respondents in an Hospital setting with available sampling technique. What type of formulae method can I use. Thank sir
Maarten Marijnissen - February, 2017
Hi,
To calculate your ideal sample size you need to make an estimation on the total population first.
For large populations (e.g. > 100,000) your required sample size doesn’t change much.
You also have to choose the confidence level and margin of error you want to allow.
Often a 95% confidence level and margin of error of 5% is taken.
The formula to calculate sample sizes is:
SS = (Z-score)² * p*(1-p) / (margin of error)²
Z-score = 1,96 for confidence level 95%
Proportion p is your expected outcome. If you don’t have any idea about the proportion, you can take 0,5. This will maximize your sample.
After calculation of sample size you have to correct for the total (estimated) population
SSadjusted = (SS) / (1 + [(SS – 1) / population])
Good luck with your research!
Bertelomewos Kinfe Gebriel - January, 2017
Hello Sir. I would like to calculate a minimum sample size for pedestrian populations nearly equal to 5000. Remember I planned to use convenience sampling
Maarten Marijnissen - January, 2017
Hi,
The ideal sample size for a population of 5,000 people with a confidence level of 95% and a margin of error of 5% is 357.
You can calculate this using our online calculator. This number can also be used for a convenience sample. It indicates how much respondents you need to get a representative sample.
Good luck with your survey!
HAQ - January, 2017
Thank you so much for this helpful article.
If I have a population of 5500 employees,I understand that I need 2365 responses given that I set the confidence interval to 99%, and the margin of error to 2%, However, I’m not sure why in the calculator, it asks me to send 9460 invites where this number is larger than the size of the overall population. (9460>5500) Could you please advise?
Please note that my sample will be a stratifed sample
Thanks
HAQ
Maarten Marijnissen - January, 2017
Hi Haq,
The number of invites in our calculator is based on the estimated response rate, so it’s just an indication.
Naturally, you can’t invite more than 5500 people. That’s why this number is in red when it’s above 5500.
You’ll see it will turn back blue, when the number of invitations is feasible.
erum - December, 2016
hello sir, i would like to conduct a survey for 20 million population to find out the deprivation level of an area, so how i would calculate the sample size for this huge population to find an
accurate results.
Maarten Marijnissen - December, 2016
Hi,
You can calculate your sample size using our sample size calculator.
The sample size of your research will depend on the margin of error and confidence level you want to use. The higher these numbers, the more respondents you will need.
The margin of error tells you how much the opinions of your sample are likely to deviate from the population.
The confidence level usually is 95% or 99% and tells you how often the percentage of the population who picks an answer lies within the margin of error.
Good luck with your survey!
uduak-obong B. - October, 2016
please I worked on a research and my population was 35 so I used a sample size of 20 respondents. is it correct because I don’t really know how to calculate my sample size
Maarten Marijnissen - October, 2016
Hi,
With a population of 35 and a sample size of 20 your margin of error (for a 95% confidence level) is 14,55%. This number is quite high.
You can calculate your ideal sample size using our calculator.
Abuzar - November, 2018
If MoE is taken 5% and confidence level is 95% then the sample size is 32, but can we use such lower number of sample size for scholarly research for the degree of M Phill. would it not effect the result.
Gert Van Dessel - December, 2018
Abuzar,
If your sample size is 32 for confidence level 95% and MoE 5%, that means your population is only 34.
In that case you might al well use the entire population for your research.
mohamed - August, 2016
hi I am working on survey on patients of some diseases and the population around the whole year is 250 persons, when i estimate the sample size it was over population size,
when confidence level is 95%, p 0.5 , and margin of error is 5%
please reply on me,
and i was suggested to to take 60 persons.
Gert Van Dessel - September, 2016
Mohamed,
When your population is 250, you need a sample of 152 for confidence level 95% and margin of error 5% with p = 0.5.
You can check with our sample size calculator
masum - September, 2016
i want to assess knowledge of nurse about pregnant women care. and my population is unknown. How I can calculate sample size?
Pls tell me the formula of calculating sample size
Gert Van Dessel - September, 2016
Masum,
First of all you have to make an estimation on the total population, e.g. the total number of nurses in your country/region.
For large populations (e.g. > 100,000) your required sample size doesn’t change much.
You also have to choose the confidence level and margin of error you want to allow.
Often a 95% confidence level and margin of error of 5% is taken.
To calculate the sample size, you can use the following formulas:
SS = (Z-score)² * p*(1-p) / (margin of error)²
Z-score = 1,96 for confidence level 95%
Proportion p is your expected outcome, e.g. when you expect 70% of nurses to have a good knowlegde about pregnant woman care, p will be 0,7.
If you don’t have any idea about the proportion, you can take 0,5. This will maximize your sample.
After calculation of sample size you have to correct for the total (estimated) population
SSadjusted = (SS) / (1 + [(SS – 1) / population])
Jelly - March, 2018
Hi , I’m doing a research too and I have 305 total number of respondents. Is it okay to use the slovin formula ?
Maarten Marijnissen - March, 2018
Hi Jelly,
If you don’t know anything about your population’s behavior, you can use Slovin’s formula to determine sample size.
Since you have 305 respondents (which is your sample) you might want to check whether the margin of error is acceptable or not.
You can use the second part of our online calculator to calculate the margin of error for your sample size by filling in population size, number of respondents and confidence level.
Good luck with your research!
Nount - August, 2016
Why we have to you standard sample size 385 or 400 in our research paper?Anyone know,please?
Gert Van Dessel - September, 2016
A sample size of 385 corresponds with a confidence level of 95% and margin of error of 5% when you have a large population (> 100,000), which is often used in research.
Abdullah - August, 2016
Good morning sir. what is the different between fixed variation and ramdom variation, and what are factors in deciding optimal samle size
Gert Van Dessel - August, 2016
Definition of random variatio (Black’s Law Dictionary): The variability that is contained within a process that cannot be determined. These fluctuations and variations are caused by erratic and irregular actions that are the result of random chance. These random variations cannot be eliminated or determined
In fixed variation, the variation stems from fixed occasions, persons or groups.
More detailed information on this subject can be found in the book ‘Explanatory Item Response Models: a Generalized Linear and Nonlinear Approach (Paul De Boeck, Mark Wilson).
To calculate your sample size, it is important to have an accurate definition of your target group, an estimation of your total population and the margin of error you want to accept for a certain confidence level (often 95% confidence level and 5% margin of error is taken). You also need to check whether your sample is representative of your total population.
To calculate the sample size, you can use our sample size calculator
mohamed - August, 2016
what does p mean and how could i estimate it
SS = (Z-score)² * p*(1-p) / (margin of error)²
because i am just started study of statistics
Gert Van Dessel - September, 2016
Mohamed,
P stands for the proportion you expect for the question you are investigating.
An example: if you want to investigate the percentage of women in a certain profession, and before performing your study, you expect this to be 30%, your proportion p will be 0,3.
If you don’t know your proportion before, you have to take 0,5 as this will maximize your sample (the more p differs from 0,5, the smaller your required sample will be).
Sinead - July, 2016
Hi, I am trying to determine what sample sizes needed- we are carrying out a quality improvement survey with patients in 40 hospitals wherein the number of patients range from aprox 1300-22,500, giving a total population of 33,000 patients across all hospitals.
We want to be able to present results at a national level and at a hospital level (comparing across hospitals). I am just not sure do I have to create my sample size per hospital using the population within the hospital ? Would really appreciate help!
Gert Van Dessel - July, 2016
Hi Sinead,
If you want to draw conclusions on a hospital level, all sample size rules will apply to each hospital’s population separately.
So you will have to calculate sample sizes per hospital. This of course will make your required total sample size considerably higher than when you only want to look at a total level.
You could also group hospitals per region and compare regions if you want to put a limit on your sample size.
Tiga - June, 2016
Please I just to know the author of sample size calculator. I also need to know if there is some document about it that i can refer?
Gert Van Dessel - June, 2016
Tiga,
This is based on a formula that is commonly used for all sample size calculators on the internet and can be found in most statistical manuals
michael - September, 2018
so I know the documented population of project affected persons, I use chi test for analysis.
What is the sample size for a population of 386 recorded households
Kind regards
Gert Van Dessel - September, 2018
You can use our sample size calculator to calculate you sample size for different confidence levels and margins of error.
Varsha Gupta - December, 2015
Dear sir
I want to conduct survey on small and medium enterprise where in there are around 4000 SMEs in my universe. kindly suggest me accurate size of sample that I should take for my Phd
Gert Van Dessel - December, 2015
For small populations you almost need to include the entire population in your sample to get a reasonable margin of error.
In this case, for 50 facilities, you will need a sample of 45 for a margin of error of 5% at the 95% confidence level.
Amunyela frans - June, 2016
Dear sir
i want to conduct a survey in a town, i have counted the number of houses per location and i got the total number of houses in the Town, but im struggling to get the minimum sample size for all the population or probably the acceptable sample size.
Numbers
Of locations in town Number of houses per location
1. 65
2. 29
3. 12
4. 29
5. 43
6. 34
7. 96
8. 113
9. 217
10. 109
11. 199
12. 118
13. 85
14. 78
15. 1489
16. 588
Total 3270
Regard
Frans Amunyela
Gert Van Dessel - June, 2016
Dear Amunyela,
You can use our sample size calculator to calculate your sample.
It is common to take a margin of error of 5% and confidence level 95%.
If you want to draw conclusions per location, you will need to calculate your sample size also per location.
E.g. for location 1 (65 houses) this would be 56 respondents, for location 15 (1489 houses) 306 respondents.
If you only want to analyse globally, you can take the total of 3270 as population and spread your sample size proportionally over the locations.
This would give you a total sample size of 344 (margin of error 5%, confidence level 95%). For location 1 you then would need 344*65/3270 = 7 respondents
The formula used in our sample size calculator:
SS = (Z-score)² * p*(1-p) / (margin of error)²
Z-score = 1,96 for confidence level 95%
When the proportion p is not known, it is common to use 0,5.
After calculation of sample size you have to correct for the total population
SSadjusted = (SS) / (1 + [(SS – 1) / population])
Safa - November, 2015
Hi, i’m doing a stratified random sampling, total population is 621,103, margin of error 5% n confidence level is 95%, your website helps me a lot doing the calculation. As the result, i only gather 384 samples.
another group of samples 475,649 and 167,720, with the same margin of error and confidence level, the total of sample are the same. Is it accurate since the total sample are different? where to get the calculation process? Thank you
Gert Van Dessel - November, 2015
Safa,
This is correct, the total required sample size doesn’t change anymore ones your population exceeds a certain number (around 130,000)
Eissen - June, 2016
Hello sir, may I know why sample size doesn’t change when it exceeds a certain number? And what theory supports it. Thank you very much.
Gert Van Dessel - June, 2016
It is correct that the sample size for large populations does not exceed 384 (for confidence level 95% and margin of error 5%).
This is based on the following formula:
SS = (Z-score)² * p*(1-p) / (margin of error)²
Z-score = 1,96 for confidence level 95%
When the proportion p is not known, it is common to use 0,5.
After calculation of sample size you have to correct for the total population
SSadjusted = (SS) / (1 + [(SS – 1) / population])
For Z = 1,96 (95% confidence level) and MOE = 0,05 SS is 384. You will see that with a large population, the denominator in the formula to calculate SSadjusted is close to 1.
Zedekia Sidha - July, 2018
total population 667; the number of regions 47; I don’t want to visit all of them. how do I select the number of regions to visit and the total number of respondents to visit
Gert Van Dessel - July, 2018
Hi Zedekia,
For a population of 667 you need a sample size of 244 if you want to limit your margin of error to 5% at a 95% confidence level (see also our sample size calculator).
This is more or less 1/3 of your population. You can choose to also visit 1/3 of the regions, and within this selection of regions examine the total population. Be sure to make your selection of regions representative (e.g. not only in the north or south, not only rich regions, …)
Rommon - October, 2015
My sample design is stratified, and previous project always include ‘response rate’ into the calculation for sample size.
I’ve recently found that response rate in each stratum is different, what do I have to do next?
What I want to ask is, are there any ways I can use these response rates to calculate strata sample sizes? Or do I have to find mean value of response rate and use it to calculate for overall sample size?
Thank you.
Gert Van Dessel - October, 2015
Rommon,
If you want ot treat your stratea as separate populations, you also have to look at them separately and calculate sample sizes per stratum. And thus use the specific response rates you have estimated based on past projects.
If you want to look at the total results of all strata as a whole, you can use the average response rate.
Kugan - October, 2015
I want to know the sample size of my survey. Because the mutual fund investors in India is unknown population so i need your help to determine sample size.
Gert Van Dessel - October, 2015
Kugan,
For large populations the sample size doesn’t change very much, e.g. for a population of 10,000 you need a sample of 370 and for 1,000,000 this is 384 (for confidence level 95% and margin of error 5%).
If you have a smaller population you will have to make an estimation. You can calculate the required number of respondents with our sample size calculator
Carlos - September, 2015
Hi, What is the best way to calculate the sample size so yhat it is repreentative of the population in the following case.
There are 3,000 total customers and on a monthly basis the ones randomly selected will fill a survey. The ones asked to fill it, will all fill it. It’s part of a negotiation.
Should I eliminate the customers that are in credit hold for that month?
So how do I get the most accurate sample size?
Regards,
CR
Gert Van Dessel - September, 2015
Carlos,
Thanks for your question. If you want to make reliable conclusions on a monthly basis, you will need 341 respondents each wave. With this sample you have a margin of error of 5% for confidence level 95%.
I would leave out the customers in credit for that month to avoid any bias.
Kaye Johnston - July, 2015
I used your calculator on sample size to find out how many I need out of 3450 total population size with an margin of error of 3% and a 95% confidence level. The calculator gave me 816 as the representative sample size.
What is the formula used to determine the representative sample size with that margin or error and confidence level?
Thank you! rkj
Gert Van Dessel - July, 2015
Hi Kaye, this is the formula:
first you calculate the sample size(SS).
SS = (Z-score)² * p*(1-p) / (margin of error)²
Z-score = 1,96 for confidence level 95%
When the proportion p is not known, it is common to use 0,5.
After calculation of sample size you have to correct for the total population
SSadjusted = (SS) / (1 + [(SS – 1) / population])
In your case:
SS = (1,96²) * 0,5*0,5 / 0,03² = 1067
SSadj. = 1067 / (1 + [(1067-1) / 3450] = 816
Shradha - August, 2015
Hi,
I am doing an interview based survey of households for a minor research project. If there are 34,342 households, then what should be my sample size? Also, since it would be a personally visited survey, there will be hundred percent response rate.
Kindly, guide me.
Gert Van Dessel - August, 2015
Shradha,
If you use a confidence level of 95% and margin of error 5% (which is common practice), you sample size will need to be 380.
You can use our sample size calculator to check for other options
Tedd - July, 2015
Hello , I am not that much into stat but i really need to determine my sample size out of a population of 915,970. Can you please explain me how to determine my sample size?
Gert Van Dessel - July, 2015
You can use our sample size calculator to determine the required sample size. You will see that for a population of 915,970, confidence level 95% and margin of error 5% this is 384
Sang Park - July, 2015
Hi, Thank you for your post.
I had a question about the required sampling size.
I am currently picking 3 out of 20 possible future scenarios and testing them in a model.
So the number of possible combinations would be (20 C 3) = 1140.
However, this is a huge number and I would like to do only the minimum number of runs.
How would I determine this number?
Thank you in advance!
Gert Van Dessel - July, 2015
Hello,
I have no straightforward answer for this specific question, I suggest you post this on a specialized statistical forum.
The number of possible combinations indeed will be 1140 if the order of scenario’s is of no importance.
Mahmoud - June, 2015
Hi, If I have to report 3000 so what should the sample size be? is 5% extra is enough so the sample size to be 3150? please advise and give your views on that and provide any standards or rules for the buffer sample.
Gert Van Dessel - June, 2015
Mahmoud,
Can you tell me what the 3000 stands for? Is that your total population? You can use our sample size calculator to calculate the required sample size for different populations, confidence levels and margin of errors.
Regina - June, 2015
Hello,
I am currently designing a community study using RCT in one district in my country. The study is about assessing the impact of mobile screening on cervical cancer among rural women aged 25-50 and this will be compared to standard care. In the district, we have 93 parishes. I will randomize at aggregate level using a 2- stage sampling implying my sample will be the parishes as the unit of analysis. Initially including all parishes and in stage two, I randomize the required number equally in the intervention and control arms. Using 20% screening rate from literature reviews, I detect a difference of 10%, a sampling error of 5%, confidence level of 95%, and 80% power. What is the best formula for me to get the right sample size of parishes required.
Thank you.
Regina
Gert Van Dessel - June, 2015
Hi Regina,
This is not a straightforward question and requires some advances statistics. The formula I’ve found to calculate the required nr. ‘n’ of clusters (or parishes in your case) for 2-stage sampling is as follows:
n = (p*(1-p)*D*Z²)/(e²*b)
With:
p = expected prevalence (when not available you take p 0,50 for max. sample size)
D = Design effect > formula: 1+(m-1)*rho
with m = observations in each cluster and rho = intra-cluster correlation
Z = critical value for the standard normal distribution (= 1,96 for confidence level 95%)
e = acceptable absolute error
b = nr. of individuals to select per cluster
I hope this is of any help.
Noel - May, 2015
Hello- we are currently conducting a customer survey and I was wondering if the way we are currently doing is better than sampling the population.
It’s pertaining to service tickets. We have on average 2198 service tickets in the last 6 months. I am assuming this is the population size?
If yes, we are currently sampling EVERYONE who opens up a service request. Our response rate (i.e those who respond), is about 42% on average.
Is this a better number representative of the population or would sampling yield better response rate?
I calculated that given 2198 is the population size, with a confidence interval of 95%, and margin of error at 5%, we would only need to sample 328 service tickets.
Thanks much,
Noel
Gert Van Dessel - June, 2015
Hi Noel,
Thanks for your interesting question. You are correct when you say that you only need 328 respondents for a confidence level of 95% and margin of error 5%.
If you say that you have a 42% response rate on all of your 2198 service tickets (sample size=923), this means that your margin of error is reduced to 2,46% for a confidence level of 95% or 3,23% for a confidence level of 99%.
Which is of course better if this doesn’t take you a lot of extra effort and/or budget.
You also need to take into account the representativeness of your sample. E.g. when your 923 respondents all come from a Northern region, you can not extrapolate this to your customers in the south. You need to have a representative spread over age, region, gender, …or try to at least.
Md Tariqul Islam - May, 2015
would you kindly tell about the reference of this equation using here.
Gert Van Dessel - June, 2015
Hi Tariqul,
This is a formula you can find in every statistical manual
Lisa - May, 2015
How would I determine the correct sample for auditng purposes at an individual level? For example, if I have 10,000 widgets being processed daily and there are 50 people processing them, how would I determine the sample per person?
Gert Van Dessel - May, 2015
Lisa,
This means you have an average of 200 widgets per person. If you use an error margin of 5% and confidence level of 95%, you would need a sample of 132 widgets.
abid - May, 2015
Hi
How do i calculate sample size of an ethnic population (15% = 820,455) of the total population 5469700 (100%)
I am doing research on this ethnic population and needs to know how many people should i get for my subjects?
If I have 90…is it enough?
Thank you
bendee - May, 2015
Hi
How do i calculate sample size of an ethnic population (15% = 820,455) of the total population 5469700 (100%)
I am doing research on this ethnic population and needs to know how many people should i get for my subjects?
If I have 90…is it enough?
Thank you
Gert Van Dessel - May, 2015
Bendee,
With 90 respondents on a population of 820,455 your margin of error will be 10,3%. This means when for example 60% of your respondents selects a certain answer option, the reel percentage for youre population will lie between 49,7% and 70,3% with a 95% confidence level.
aisha - April, 2015
Hello,
I would like to conduct a telephony survey to get an idea on how we are doing in our retail field for our furniture showrooms.
I have a database of 500,000 customers.
Could you advise how many customers i should be calling to participate in the survey?
Thanks.
Gert Van Dessel - April, 2015
Aisha,
For a margin of error of 5% and confidence level 95% you will need 384 respondents.
You can check with our sample size calculator
june raymond mariano - March, 2015
hi sir
What are the parameters to know the effectivity of a machine in the ease of understanding of operation. can i do statatistical analysis on how to evaluate its effectiveness.
thanks
June
Ishtiaq - March, 2015
I have 20 colleges with different no. of students and a total population of 1 lakh. around 2000 to 6000 students in a college. how many students should i take from each college.
As per your website calculator i have to select 400 students out of 1 lakh.
Asad - February, 2015
I am going to conduct the baseline study of 3 districts. How can i calculate sample size. With known population of 3 distritcs
Ishtiaq - March, 2015
I have 20 colleges with different no. of students and a total population of 1 lakh. around 2000 to 6000 students in a college. how many students should i take from each college.
As per your website calculator i have to select 400 students out of 1 lakh.
frimpong - December, 2014
sir
how can i calculate the sample size when given population only
Nasriah Macadato - October, 2014
Hello. I’m a 4th year nursing student and I’m working on our undergrad study which is a descriptive study on the level of emotional intelligence of nurses to their level of job performance or satisfaction. there are 26 regular nurses and 92 casual nurses. a total of 118 nurses. im confused on how many samples am I going to choose in each wards. and the margin of error and confidence level is a bit tricky to me.
Celia - September, 2014
I have read lots of theories on determining sample sizes. But I would like to be assured on how to appropriately decide on the number of sample I will make from an 80000 CDs each containing 800 to 1000 records and found out that there were some bad records. How many CDs are to be sampled to say that there were minimal bad records or only 1% records were bad. Thank you.
Akanksha Jain - September, 2014
Hi,
I got to learn a about the computation of Sample size but I would like to know a precise answer to my problem statement. My problem statement is that I have a population which includes customers visiting my site from multiple devices and buying from a particular device and customers visiting and buying from same device.
Main problem I am facing is that I am unable to classify the percentage of customer who is coming from multiple device and customer coming from single device but I want to estimate a number that can represent the entire population.
Kate - September, 2014
The survey I am running is voluntary, so response rate will be 100%. Can you please explain how this will impact the calculation of the sample size.
Thanks in advance.
Didier Dierckx - September, 2014
Hi Kate,
Thanks for your question.
I suppose you mean that your survey is mandatory rather than voluntary?
Anyway, it does not impact the calculation of your sample size. You still need a number of respondents. However, it might impact the number of invitations you send out as you do not have to consider the response rate and thus send out more invitations).
Hope this helps!
Didier
Nayab - July, 2014
Hi thank u for a really helpful website. Im conducting a research on the millennial generation in Pakistan who are on facebook for my M Phil thesis. That makes up around 2 million people. Now since the response rate is quite low questionnaires were sent four times the estimated sample size. Which was 385 according to your website. Now after one month number of responses I got are 320. I don’t have much time so can I go forward to data analysis with the acquired number of responses or should I get more?
Didier Dierckx - September, 2014
Hi Nayab,
Thank you for your question.
I can already assure you, you can go forward with the acquired number of responses.
However, there is a caveat. Your margin of error will be larger than 5%. You can calculate the actual margin of error via this link: https://fe-stage.checkmarket.com/market-research-resources/sample-size-calculator/.
Hope this helps!
Regards,
Didier
Nhung - July, 2014
How to calculate the number of product from line which have 10 machines and have cycletime of each workstaion?
Can you help me?
Thank
Didier Dierckx - July, 2014
Dear Nhung,
Thank you for your question.
Could you please elaborate your question a bit more as I am not too sure what you exactly mean.
Thanks!
Regards,
Didier
Angela - May, 2014
Thank you for your helpful website. I am conducting a survey with college faculty at 5 local area colleges, with a total population of 800 full-time faculty. I am using a predictive correlational design and have 1 IV (with four sub concepts) and 1 DV (with five sub concepts). Based on similar surveys, I expect a 20% response rate. Will this give me a large enough sample size?
Didier Dierckx - July, 2014
Hi Angela,
I would calculate your sample size for each college separately, i.e. treat each college as a separate ‘population’. As such you will be sure that each college has a large enough sample size.
You can use our calculator for this: https://fe-stage.checkmarket.com/market-research-resources/sample-size-calculator/
Regards,
Didier
Maria - December, 2013
what is the formula of calculating sample size? like if use the sample size determined from the above calculation, how do we prove it?
Didier Dierckx - December, 2013
Dear Maria,
Thank you for your questions.
In the following blog article I explain all your questions (https://fe-stage.checkmarket.com/2013/02/how-to-estimate-your-population-and-survey-sample-size/).
Kind regards,
Didier
KER - November, 2013
We want know awareness levels of cancer patients attending hospital in specific area of India having 4 crore population. What is the minimum sample size required for this study…? cross sectional study in dental hospitel